Bush DW12LSINTE1 9343751 Instruction Manual

To reset your Bush DW12LSINTE1 dishwasher, press and hold the start button for approximately 3 seconds until the indicators on the panel flash. This will reset the machine and clear any errors.
If your dishwasher is not draining, check the drain hose for any clogs or kinks. Also, inspect the filter located at the bottom of the dishwasher and clean it if necessary. Ensure that the garbage disposal is clear if connected.
Unusual noises can be caused by items within the dishwasher touching the spray arms. Ensure that dishes are loaded correctly without obstructing the arms. Additionally, check for any loose or foreign objects in the dishwasher.
It is recommended to clean the filter every month to ensure optimal performance and to prevent any blockages that may affect the dishwasher's operation.
Use a high-quality dishwasher detergent in tablet, gel, or powder form. Avoid using regular liquid dish soap as it can create excessive suds and potentially damage the appliance.
To improve drying performance, ensure that you use a rinse aid, which helps water to sheet off dishes. Also, select a higher temperature wash cycle and open the door slightly after the cycle ends to allow steam to escape.
Check if the door seal is intact and clean. Ensure that the dishwasher is level and that the door gasket is not damaged. Verify that the spray arms are not cracked and are properly attached.
Ensure that you are not overloading the dishwasher and that dishes do not obstruct the spray arms. Check that the water temperature is set to a minimum of 120°F (49°C) and that the filter is clean.
Regularly clean the filter and door seals. Run an empty cycle with a dishwasher cleaner or a cup of vinegar to eliminate odors. Ensure dishes are rinsed before loading to prevent food buildup.
Regular maintenance includes cleaning the filter monthly, checking the spray arms for clogs, wiping down the door seal, and using a dishwasher cleaner every few months to remove mineral deposits.