Bush DAB-1507 5535927 Instruction Manual
![Bush DAB-1507 5535927 Radio manual cover](/images/kqwKdDulBOGCgCSAEjGhGKVH/thumbs/thumb175x175.webp)
To perform a factory reset, press the 'Menu' button, navigate to 'System Settings', select 'Factory Reset', and confirm your choice. This will restore the radio to its original settings.
Ensure that the radio's antenna is fully extended and positioned correctly. Try performing a full scan by pressing the 'Auto Tune' button to search for available stations.
To improve FM reception, extend the antenna fully and adjust its position. Moving the radio closer to a window or away from electronic devices can also help reduce interference.
Yes, the Bush DAB-1507 radio can be powered using 4 AA batteries. Ensure the batteries are inserted correctly in the compartment at the back of the radio.
To set an alarm, press the 'Menu' button, navigate to 'Alarm', set the desired time, and choose the alarm sound (DAB/FM/Buzzer). Confirm your settings to activate the alarm.
Check if the sleep timer is set, which could be causing the radio to turn off. Also, ensure the power source (batteries or AC adapter) is functioning correctly.
Press the 'Mode' button on the radio to toggle between DAB and FM modes. The display will show the current mode setting.
Yes, to preset a station, tune in to the desired station, press and hold one of the preset buttons until you hear a beep. The station will be saved to that preset number.
Use the rotary volume control knob on the side of the radio to increase or decrease the volume. The display will show the current volume level.
The 'No Signal' message indicates that the radio cannot receive a signal from the selected station. Try repositioning the antenna or moving the radio to a different location.