Bush BECFB142L 9402939 Instruction Manual
![Bush BECFB142L 9402939 Freezer manual cover](/images/AmHBWAJuccSgsBgOlkXMzUoE/thumbs/thumb175x175.webp)
To set the temperature on your Bush BECFB142L freezer, locate the temperature control dial inside the freezer compartment. Turn the dial to your desired setting, typically between 3 and 5 for optimal freezing. Monitor the temperature over the next 24 hours and adjust as necessary.
First, check if the freezer is properly plugged in and the power is on. Ensure the door is closing properly and there is no obstruction. Verify the temperature setting and consider a lower setting if needed. If the issue persists, inspect the condenser coils for dust buildup and clean them. If problems continue, contact a professional technician.
The Bush BECFB142L freezer is a manual defrost model. It should be defrosted whenever the frost buildup inside the freezer reaches about 6mm (1/4 inch) thickness. To defrost, unplug the freezer, remove all contents, leave the door open, and allow the frost to melt. Clean and dry the interior before plugging it back in.
To clean your Bush BECFB142L freezer, unplug it first. Remove all food items and detachable shelves. Use a soft cloth with a mixture of mild soap and warm water to wipe down the interior. Rinse and dry thoroughly before replacing shelves and food. Avoid using abrasive cleaners or sharp objects that could damage the interior.
Water pooling can occur if the freezer is not level, causing the defrost water to accumulate rather than drain properly. Check the leveling of the freezer and adjust the feet as necessary. Additionally, ensure the drain hole is not clogged. Clean it with a pipe cleaner or similar tool if needed.
It is generally not recommended to store items on top of your Bush BECFB142L freezer, as it may obstruct airflow and affect the freezer’s efficiency. If necessary, only place lightweight items and ensure they do not block any ventilation openings.
Unusual noises from the Bush BECFB142L freezer could be due to several reasons, including a vibrating compressor or loose components. Ensure the freezer is on a stable surface and check for any loose parts. If the noise persists, it might be best to consult a professional technician.
To improve energy efficiency, ensure the door seals are intact and sealing properly. Keep the freezer in a cool, well-ventilated spot away from direct sunlight and other heat sources. Regularly defrost to prevent excessive frost buildup and avoid overloading the freezer, which can hinder air circulation.
If the internal light is not working, check if the bulb has burned out and replace it if necessary. Ensure the freezer is properly connected to the power supply. If the light still doesn’t work after replacing the bulb, there may be an electrical issue, and you should seek professional assistance.
When transporting your Bush BECFB142L freezer, secure the door with tape and ensure the appliance is upright to prevent damage to the compressor. If it must be laid on its side, let it stand upright for several hours before plugging it in to ensure the oil flows back into the compressor.