Bush 9153219 Instruction Manual

To set the time on your Bush 9153219 Radio, press the 'Time Set' button, use the 'Hour' and 'Minute' buttons to adjust the time, and press 'Time Set' again to confirm.
Ensure that the radio is plugged into a working power outlet. Check for any blown fuses or tripped circuit breakers. If it still doesn't turn on, the power cord or the unit might be faulty.
For better reception, extend the antenna fully and position it for the best signal. Avoid placing the radio near electronic devices that could cause interference.
Yes, tune to the desired radio station, press and hold a preset button until you hear a confirmation beep, indicating the station is saved.
Check the volume level and reduce it if it's too high. Ensure the antenna is correctly positioned, and try moving the radio away from other electronic devices.
To perform a factory reset, unplug the radio, press and hold the 'Power' button while plugging it back in, and release the button when the display turns on.
No, the Bush 9153219 Radio does not support external speakers. It is designed to be a standalone unit with built-in speakers.
Unplug the radio before cleaning. Use a soft, dry cloth to gently wipe the exterior. Avoid using water or cleaning agents directly on the radio.
The Bush 9153219 Radio can be powered by an AC power cord connected to a wall outlet. It does not support battery operation.
Press the 'Band' button on the radio to toggle between AM and FM bands. Each press will switch the radio to the next available band.