Bush 5424320 DWINT125W Instruction Manual
![Bush 5424320 DWINT125W Dishwasher manual cover](/images/VcyLvtEAxmFgxSqcBlLOzEqB/thumbs/thumb175x175.webp)
To reset the dishwasher, press and hold the start button for 3 seconds until the display shows "rE" or similar. This will reset the cycle and clear any errors.
Check for a clogged drain hose or filter. Clean the filter and ensure the drain hose is not kinked or obstructed. If the problem persists, verify that the sink drain is not blocked.
For optimal performance, clean the dishwasher filter every month. Remove the bottom rack, take out the filter, rinse it under running water, and replace it securely.
The E4 error code indicates a water overflow. Check for any leaks or excessive suds. Inspect the water inlet valve and ensure the float switch is functioning properly.
Ensure rinse aid is filled in the dispenser to help water sheet off dishes. Select the heated drying option if available, and unload the bottom rack first to prevent water from dripping onto dry dishes.
No, regular dish soap should not be used in the dishwasher as it can cause excessive suds and overflow. Always use detergent specifically designed for dishwashers.
Run an empty cycle with a dishwasher-safe cup filled with white vinegar on the top rack. This will help dissolve mineral buildup and remove stains.
Ensure that dishes are loaded properly and not touching each other. Check for any foreign objects in the spray arms or filter area. Tighten any loose parts or screws.
Regularly clean the filter and door seals. Run a cleaning cycle with a dishwasher cleaner or a cup of baking soda to remove odors. Leave the door slightly ajar when not in use to allow air circulation.
Remove and clean the spray arms every few months to ensure that they are not clogged with debris. Rinse them under running water and clear any blocked holes with a toothpick.