Bush 5056406 Instruction Manual
![Bush 5056406 Radio manual cover](/images/CgUtgDwiNVKvVMNtEoFmUigO/thumbs/thumb175x175.webp)
To set the time, press and hold the 'Clock' button until the hour digits flash. Use the tuning buttons to adjust the hours and press 'Clock' again to set minutes. Once the correct time is displayed, press 'Clock' to confirm.
Ensure the radio is plugged into a working outlet. Check the power cord for damage. If using batteries, confirm they are inserted correctly and have adequate charge.
Yes, to preset a station, tune to your desired frequency, then press and hold a preset number button until you hear a beep. The station is now saved to that preset number.
Check the antenna connection and adjust its position. Ensure the volume is not set too high. If using an auxiliary input, verify the source device's volume is at an appropriate level.
Extend and reposition the FM antenna for better reception. Avoid placing the radio near electronic devices that may cause interference.
Yes, to reset, unplug the radio and remove any batteries. Leave it disconnected for at least 10 minutes. Reconnect the power and batteries, and the radio should be reset.
Press the 'Band' button to toggle between AM and FM bands. The display will indicate the current band.
Use a soft, dry cloth to wipe the exterior of the radio. Avoid using water or cleaning agents, as they may damage the device.
Press the 'Alarm' button and use the tuning buttons to set the desired alarm time. Press 'Alarm' again to confirm. Ensure the alarm is activated by checking the display for the alarm icon.
Verify the radio is receiving power. If using batteries, replace them with fresh ones. If the issue persists, contact customer support for assistance.