Brandt WT11765E User Manual
![Brandt WT11765E Washing Machine manual cover](/images/XJmYwaAFgyYjZmIlpvLqvURM/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, close the door securely, select the desired wash program using the program selector, and press the 'Start' button.
Ensure the machine is plugged in and the power outlet is working. Check if the door is closed properly and if the water supply is turned on. Also, ensure the start button has been pressed.
Remove the detergent drawer by gently pulling it out and pressing the release clip. Soak it in warm water and scrub with a soft brush to remove any residue. Rinse thoroughly and reinsert it into the machine.
Error codes indicate specific issues with the washing machine. Refer to the user manual for a list of error codes and their meanings. Common solutions include checking for blockages, ensuring proper water supply, and verifying door closure.
It is recommended to clean the lint filter every month to ensure efficient operation. Locate the filter at the bottom of the machine, remove any lint or debris, and rinse it under running water.
Yes, you can pause a wash cycle by pressing the 'Start/Pause' button. Once paused, the door will unlock after a few seconds, allowing you to add or remove laundry. Press the button again to resume the cycle.
Excessive vibration can be caused by an unbalanced load. Stop the machine and redistribute the laundry evenly in the drum. Also, ensure that the machine is level on the ground.
To perform a drum clean cycle, remove all laundry, add a drum cleaning agent or vinegar into the detergent drawer, select the highest temperature setting, and run an empty cycle.
Regularly clean the detergent drawer, lint filter, and drum. Check and clean the water inlet filters every few months. Ensure the machine is level and avoid overloading to maintain optimal performance.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and free from debris. If the problem persists, there may be an issue with the pump that requires professional service.