Brandt WF147L User Manual

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control panel, and press the 'Start/Pause' button.
Check if the power cord is properly plugged in, ensure that the door is securely closed, and verify that the water supply is turned on. Also, make sure the 'Start/Pause' button has been pressed.
Pull out the detergent drawer until it stops, press the release button, and remove it completely. Wash it under running water to remove any detergent residues.
Error code E03 indicates a drainage issue. Check if the drainage hose is clogged or kinked and if the pump filter is clean.
It is recommended to clean the pump filter every 2-3 months to ensure optimal performance and prevent blockages.
Yes, the Brandt WF147L has a specific 'Delicate' program designed for washing delicate fabrics safely. Select this program from the control panel.
Ensure the washing machine is level on the floor and check that all transit bolts have been removed. Avoid overloading the machine and distribute laundry evenly in the drum.
Yes, you can pause the wash cycle by pressing the 'Start/Pause' button. Wait for the door lock to release before opening the door.
Check that the water tap is turned on, the inlet hose is not kinked, and the filter in the inlet valve is not blocked.
Leave the door and detergent drawer open after each wash to allow air circulation. Run a monthly maintenance wash with a washing machine cleaner or a mixture of hot water and vinegar.