Brandt WT10735E User Manual

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, close the door, select the desired program using the program selector dial, and press the start button. Ensure all settings are correct before starting.
Check if the machine is properly plugged in and the power supply is active. Ensure the door is fully closed and the water supply is turned on. If the problem persists, consult the user manual for additional troubleshooting steps.
To clean the detergent dispenser, remove it by pulling it out gently. Rinse it under warm water to remove any detergent residue. Use a soft brush to clean any stubborn deposits. Dry thoroughly before reinserting it into the machine.
If the machine is not draining, check for blockages in the drain hose or pump filter. Ensure the drain hose is properly positioned. If the issue continues, refer to the manual or contact a professional technician.
To reduce vibrations, ensure the washing machine is level and stable. Check that all four feet are firmly on the ground. Distribute laundry evenly in the drum to balance the load. Avoid overloading the machine.
Regular maintenance includes cleaning the detergent dispenser, checking and cleaning the pump filter, and occasionally running an empty hot wash with a descaling agent to prevent buildup. Inspect hoses for wear and replace if necessary.
Refer to the error code section in the user manual, which provides explanations and solutions for each code. Common solutions include checking connections, cleaning filters, and resetting the machine.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the drum, gasket, and detergent drawer. Use a washing machine cleaner monthly to eliminate residues and odors.
Place larger items evenly around the drum and fill gaps with smaller items. Avoid overloading, and ensure there is enough space for clothes to move freely. Follow the manufacturer's load capacity guidelines.
To reset the machine, turn off the power, unplug it from the electrical outlet, wait a few minutes, then plug it back in and turn it on. Select a new wash program and start the machine.