Brandt WT08100W User Manual

To start a washing cycle, load your laundry into the drum, add detergent to the dispenser, select the appropriate wash program using the program knob, and press the start button.
Ensure that the machine is properly plugged in, the door is closed securely, and the water supply is turned on. Check for any error codes on the display and refer to the manual for troubleshooting steps.
Remove the detergent drawer by pulling it out gently. Wash it under running water using a soft brush to remove any residue. Dry it completely before reinserting it into the machine.
Regularly clean the detergent drawer, drum, and filter. Inspect hoses for leaks or damage, and ensure the machine is level to prevent excessive vibrations.
To reset the machine, unplug it from the power source, wait for a few minutes, and then plug it back in. This can help resolve minor electronic glitches.
Error codes indicate specific issues with the machine. Refer to the user manual to interpret the code and follow the recommended troubleshooting steps.
Leave the door open after each wash to allow air circulation, and occasionally run a hot wash cycle with vinegar or a washing machine cleaner to remove buildup.
Yes, use the delicate or hand wash cycle, and place delicate items in a mesh laundry bag to protect them during the wash.
Ensure the washing machine is level and on a stable surface. Check that the load is balanced and adjust as necessary. Avoid overloading the drum.
Check and clean the drain filter for blockages, ensure the drain hose is not kinked or blocked, and verify that the drain pump is functioning properly.