Brandt WFE1461K User Manual

To start a wash cycle, load your laundry, add detergent, select the desired program using the rotary dial, and press the start button.
Check if the water supply is turned on, ensure the inlet hose is not kinked, and inspect the inlet filter for blockages.
Remove the detergent drawer by pulling it out completely. Rinse it under warm water to remove any residue, then dry and replace it.
Regularly clean the detergent drawer, door seal, and drum. Check the drain pump filter and inlet filters for blockages every few months.
Unplug the machine from the power source, wait for a few minutes, then plug it back in. This may reset minor errors.
Ensure the load is balanced, check for any blockages in the drain pump filter, and verify that the spin speed setting is appropriate.
Leave the door and detergent drawer open after each wash to allow the interior to dry. Regularly clean the door seal and drum.
Check if the machine has fully drained and that the cycle is complete. If the door remains locked, consult the manual for emergency release instructions.
Ensure the machine is level, check the load distribution, and confirm the transit bolts have been removed if recently installed.
Use a high-efficiency (HE) detergent for optimal performance and to prevent excessive suds.