Brandt WFD1146E User Manual

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control knob, and press the Start button.
Check if the door is properly closed, ensure the power cord is plugged in, and verify that the water supply is turned on. If the problem persists, consult the user manual for troubleshooting tips.
To clean the detergent drawer, pull it out gently, rinse it under warm water to remove any detergent residue, and dry it thoroughly before reinserting it into the machine.
Regularly clean the detergent drawer and drum, check and clean the filter, and run a maintenance wash with an empty drum and a descaling agent every few months.
Ensure the drainage hose is not kinked or blocked, check the filter for debris, and make sure the drain pump is functioning properly. Consult the user manual if further assistance is needed.
Yes, the machine has a dedicated delicate wash program. Use a gentle detergent and select the appropriate cycle for delicate fabrics to avoid damage.
Ensure the washing machine is level on the ground, avoid overloading the drum, and distribute laundry evenly inside the drum to minimize vibration and noise.
Refer to the user manual to identify the error code and follow the suggested troubleshooting steps. If the issue persists, contact customer support.
To reset the washer, unplug it from the power outlet, wait for a minute, and then plug it back in. This can help resolve minor glitches.
Use high-efficiency (HE) detergent for the best results and to prevent excessive suds. Always follow the detergent manufacturer's instructions for dosage.