Brandt WF147SEG User Manual
![Brandt WF147SEG Washing Machine manual cover](/images/PzKjbKUWZEgPDkOWjQhrDNwa/thumbs/thumb175x175.webp)
To prevent unbalanced loads, evenly distribute your clothes around the drum. Avoid overloading and ensure that large items, like towels or sheets, are placed around the drum's perimeter.
Ensure the machine is plugged in, the door is closed properly, and the water supply is on. Check for any error codes on the display and refer to the manual for troubleshooting steps.
Remove the detergent drawer by pulling it out gently. Wash it under warm water with mild soap, using a brush to remove any residue. Rinse thoroughly before reinserting.
Regularly clean the drum, check hoses for leaks or wear, avoid overloading, and use the appropriate detergent. Perform periodic maintenance washes with a drum cleaner.
Ensure the machine is level on the ground and adjust the feet if necessary. Check that the load is balanced and that the transit bolts have been removed if the unit is newly installed.
Inspect the drain hose for any kinks or blockages. Clean the pump filter to remove any debris that could prevent proper drainage.
Leave the door slightly open after use to allow the drum to dry. Regularly clean the gasket and perform maintenance washes with hot water and vinegar or a specialized cleaner.
Ensure the load is balanced and not too small. Check if the spin cycle is set correctly and that no error codes are displayed. Refer to the manual if adjustments are needed.
Locate the filter access panel at the bottom front of the machine. Open the panel and unscrew the filter cap to remove and clean it. Ensure it is securely reattached after cleaning.
Use the 'Delicates' or 'Hand Wash' cycle, which uses a gentle motion and lower spin speed to protect delicate fabrics. Always refer to garment care labels for guidance.