Brandt WF127L User Manual
![Brandt WF127L Washing Machine manual cover](/images/FhUuYCHqEANuOWbYbrCUjxiM/thumbs/thumb175x175.webp)
To reset the Brandt WF127L washing machine, unplug the appliance from the power outlet, wait for about 1-2 minutes, and then plug it back in. This should reset the electronic controls.
If the Brandt WF127L does not start, check if the door is properly closed. Also, ensure that the machine is plugged in and the power outlet is functioning. Verify that the water supply is turned on and the program is correctly set.
Remove the detergent drawer by pulling it out until it stops, then press the release lever to fully remove it. Rinse the drawer under warm water to remove any residue. Use a soft brush to clean any remaining detergent buildup.
Regular maintenance includes cleaning the detergent drawer and drum, checking and cleaning the filter, and inspecting hoses for any signs of wear or leaks. Run an empty hot wash cycle with vinegar once a month to keep the drum fresh.
Ensure the washing machine is level on the floor. Check for any loose objects in the drum and make sure the load is balanced. Inspect the shock absorbers and springs for wear and replace them if necessary.
Check if the drain hose is kinked or clogged. Clean the pump filter to remove any debris. Ensure that the drain pump is functioning correctly and replace it if faulty.
Leave the door slightly open when not in use to allow air circulation. Regularly clean the drum and gasket with a mild detergent. Run a monthly cleaning cycle using baking soda and vinegar.
Ensure that the washing machine is level using a spirit level. Check that all transport bolts have been removed. Balance the load inside the drum and avoid overloading the machine.
Locate the filter access cover at the bottom front of the machine. Place a towel and a shallow container beneath it to catch any water. Turn the filter counterclockwise to remove it, rinse it under running water, and then reinstall it securely.
Check the hoses for any cracks or loose connections. Inspect the door seal for damage or debris. Ensure the detergent drawer is not overfilled, which can cause overflow. If the problem persists, contact a professional technician.