Brandt VH916J User Manual
![Brandt VH916J Dishwasher manual cover](/images/vRQJzpwgkiQccATKybDDEtaX/thumbs/thumb175x175.webp)
To reset your Brandt VH916J dishwasher, press and hold the start button for about 3 seconds until the display shows a reset or the current cycle cancels.
Ensure the door is fully closed and latched. Check if the dishwasher is properly plugged in and the circuit breaker is not tripped. Also, make sure the water supply is turned on.
Remove the lower rack and locate the filter at the bottom of the dishwasher. Twist and pull out the filter, then rinse it under running water to remove debris. Reinstall the filter by placing it back and twisting it to lock in place.
Spots can be caused by hard water. Ensure you are using a rinse aid, and adjust the amount used if necessary. Also, check that you are using the correct amount of detergent for your water hardness.
Error code E4 indicates a water overflow issue. Check for any blockages in the drain hose or filter, and ensure the water inlet valve is functioning properly.
It's recommended to clean the spray arms every 3 to 6 months. Remove them from the dishwasher and rinse under running water, using a brush to remove any debris from the holes.
Unusual noises can be caused by items that have fallen into the bottom of the dishwasher or spray arms hitting dishes. Check for obstructions and ensure dishes are loaded properly.
No, you should not use regular dish soap as it can create excessive suds and cause leaks. Always use detergents specifically designed for dishwashers.
Ensure you are using a rinse aid and selecting a drying cycle if available. Loading dishes to allow proper air circulation can also improve drying.
Regular maintenance includes cleaning the filter, checking and cleaning spray arms, wiping the door gasket, and running a cleaning cycle with dishwasher cleaner every few months.