Brandt VH645XE1 User Manual

To reset your Brandt VH645XE1 dishwasher, press and hold the Start/Reset button for about 5 seconds until you hear a beep. This will reset the control panel and cancel the current cycle.
If your dishwasher is not draining, check for blockages in the filter, drain hose, and garbage disposal. Ensure that the drain hose is not kinked and the sink drain is clear. Clean the filters as described in the user manual.
It is recommended to clean the filters every month to ensure optimal performance. Remove the filters, rinse them under running water, and use a soft brush if necessary to clear any debris.
Common error codes include E1 (water supply issue), E2 (drainage problem), and E4 (water leak). Refer to the user manual for detailed troubleshooting steps for each error code.
Spots on glassware may result from hard water. Ensure you are using a rinse aid and check that the detergent is suitable for your water hardness. Adjust the rinse aid setting if necessary.
To improve drying performance, ensure that the rinse aid dispenser is filled, and use the heated dry option if available. Make sure the items in the dishwasher are arranged to allow water to drain off easily.
Yes, you can use tablet detergents. Place the tablet in the detergent dispenser and ensure the dispenser is dry before placing the tablet to avoid it from dissolving prematurely.
Regular maintenance includes cleaning the filters monthly, checking and cleaning the spray arms, wiping the door seals, and inspecting the hose connections for leaks.
Place large items on the bottom rack, and smaller items on the top rack. Ensure that nothing blocks the spray arms. Avoid overcrowding to allow water and detergent to reach all surfaces.
Check for any foreign objects in the spray arms or drain pump. Ensure that the dishwasher is level and that dishes are loaded properly without touching each other or the spray arms.