Brandt VH625JE1 User Manual

To reset your Brandt VH625JE1 dishwasher, press and hold the start button for about 3 seconds until you see the indicator lights flash, then release the button. This will reset the dishwasher to its factory settings.
First, check the drain hose for any blockages or kinks. Ensure the filter is clean and not clogged. If the issue persists, inspect the pump for any obstructions and clean it as necessary.
To clean the filter, remove the lower dish rack, twist the filter assembly counterclockwise, and lift it out. Rinse the filter under running water to remove debris. Reassemble by aligning and twisting the filter back into place.
Ensure you're using a rinse aid to enhance drying. Check that the selected wash cycle includes a drying phase. Make sure the heating element is functioning correctly by running a high-temperature wash cycle.
Use high-quality dishwasher detergents in powder, gel, or tablet form. Ensure they are specifically designed for automatic dishwashers to prevent residue and ensure optimal cleaning performance.
Clean the spray arms every 3-6 months. Remove them by unscrewing the nut or clip, rinse under water, and use a toothpick to clear any blocked spray holes. Reattach securely after cleaning.
Run an empty cycle with a cup of white vinegar placed on the top rack. Ensure filters and seals are clean, and check for food debris trapped in the machine. Use a dishwasher cleaner monthly to prevent odors.
Consult the user manual to access the settings menu. Use the control panel to navigate to the water hardness settings, then adjust according to your local water hardness level as indicated in the manual.
Check for loose items such as utensils that may have fallen into the spray arm path. Inspect the spray arms for blockages. Ensure the dishwasher is level to avoid vibrations. If noises persist, consult a technician.
Yes, you can wash plastic items, but place them on the top rack to avoid exposure to the heating element. Ensure that the items are labeled dishwasher-safe to prevent warping.