Brandt VH1225JE User Manual
![Brandt VH1225JE Dishwasher manual cover](/images/kkZElVfCxnmQVkmvLNwpTDwq/thumbs/thumb175x175.webp)
To reset the Brandt VH1225JE dishwasher, press and hold the start button for about 3 seconds until the display shows a reset indication. This will clear any current cycle and reset the dishwasher.
Check the filter and drain hose for any blockages. Clean the filter and ensure the drain hose is not kinked or clogged. If the problem persists, the drain pump might need servicing.
To clean the filter, remove the lower rack and twist the filter assembly counterclockwise to remove it. Rinse the filter under warm water and use a soft brush if necessary. Reinstall by twisting it back clockwise.
Ensure that you are using a rinse aid, as it helps with drying. Check that the dishwasher is not overloaded and that the selected cycle includes a drying phase.
Use high-quality dishwasher detergent in either powder, gel, or tablet form. Avoid using hand dishwashing soap to prevent excessive suds.
It's recommended to clean the spray arms every 2-3 months. Remove them and rinse under warm water, using a brush to clear any blocked holes.
Check the door seal for damage and ensure the dishwasher is level. Inspect the water inlet and drain hose for leaks. If necessary, replace the faulty parts.
Noises can be caused by items touching the spray arms. Ensure dishes and utensils are properly loaded. Check for loose or foreign objects in the dishwasher.
Regularly clean the filter, spray arms, and door seals. Run an empty cycle with dishwasher cleaner every few months to prevent build-up and maintain efficiency.
Refer to the user manual to adjust the water hardness setting. Typically, this involves entering the settings menu and selecting the appropriate hardness level based on your local water supply.