Brandt VH1205JE User Manual
![Brandt VH1205JE Dishwasher manual cover](/images/dkoscNOuEisraInTrNqiItEZ/thumbs/thumb175x175.webp)
To reset the Brandt VH1205JE dishwasher, press and hold the start/pause button for approximately 3 seconds until the indicator lights flash. This will reset the control panel.
First, ensure the dishwasher is plugged in and the circuit breaker is not tripped. Check that the door is properly closed and the start button has been pressed. If the problem persists, consult the user manual for further troubleshooting.
Remove the lower dish rack and locate the filter at the bottom of the dishwasher. Turn the filter counterclockwise to remove it. Rinse it under running water and use a soft brush to remove any debris. Reinstall the filter by turning it clockwise until it locks into place.
Use a high-quality, automatic dishwasher detergent. Avoid using dish soap or hand-washing detergent as these may cause excessive suds. For best results, follow the detergent manufacturer's instructions.
Ensure that the rinse aid dispenser is filled as rinse aid helps with drying. Also, check that the selected wash cycle includes a drying phase. If the problem continues, increase the rinse aid dosage or use a different drying setting.
Regular maintenance should be performed monthly. This includes cleaning the filter, checking spray arms for blockages, and wiping down the door seals. Refer to the maintenance section of the user manual for detailed instructions.
Error code E4 indicates a water overflow issue. Check for any blockages in the drainage system and ensure that the water inlet valve is functioning properly. If the error persists, contact customer support for assistance.
Yes, you can wash plastic items that are labeled as dishwasher-safe. Place them on the top rack to avoid exposure to intense heat from the bottom heating element. Avoid washing plastic items that are not marked as dishwasher-safe.
Check for any items that might be obstructing the spray arms or touching the interior walls. Also, ensure that dishes are not stacked too closely together. If noises persist, inspect the dishwasher for loose components or contact a technician.
To adjust the water hardness setting, refer to the settings menu on the control panel. Use the user manual to understand the correct procedure and recommended settings based on your local water hardness.