Brandt TT1110 User Manual

To adjust the temperature, locate the thermostat dial inside the fridge compartment. Turn the dial clockwise to lower the temperature and counter-clockwise to increase it. Allow 24 hours for adjustments to stabilize.
Check if the thermostat is set to the correct temperature. Ensure the vents inside the fridge are not blocked by food items. Clean the condenser coils located at the back of the unit to improve efficiency.
The Brandt TT1110 Refrigerator is a frost-free model and does not require manual defrosting. However, if ice builds up, you can unplug the unit and let it defrost naturally.
Unusual noises could be due to the refrigerator not being level. Ensure the unit is on a flat surface. Check if any items inside are vibrating against each other or the walls of the fridge.
Use a mild detergent mixed with warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth. Avoid using abrasive cleaners or scouring pads.
First, unplug the refrigerator. Locate the light cover, usually at the top of the fridge compartment. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage.
Check if the door seals are clean and free from debris. If the seals are damaged, consider replacing them. Ensure the refrigerator is level and adjust the front leveling legs if necessary.
Keep the refrigerator away from heat sources like ovens or direct sunlight. Ensure the door seals are tight and not damaged. Regularly clean the condenser coils to maintain optimal efficiency.
Store food in airtight containers to prevent spills and odors. Regularly clean the interior with baking soda and water. Consider placing an open box of baking soda inside to absorb odors.
This might be due to a blocked defrost drain. Unplug the refrigerator and locate the drain hole, usually found at the back. Clear any blockages with warm water or a pipe cleaner.