Brandt SL2830 User Manual

To set the temperature, use the control panel inside the refrigerator. For optimal performance, set the fridge section between 3°C and 5°C and the freezer around -18°C.
First, check if the refrigerator is plugged in and the circuit breaker is on. Ensure that the vents inside are not blocked by food items and that the door seals are clean and intact. If the issue persists, consider contacting a service technician.
It is recommended to clean the condenser coils every 6 months to maintain efficiency. Use a vacuum or a brush to remove dust and debris.
To defrost, remove all items from the freezer, unplug the refrigerator, and leave the freezer door open. Place towels to absorb the water and clean the freezer once the ice has melted.
Ensure that the refrigerator is level and not touching the wall or cabinets. Check for loose items on or inside the fridge that might vibrate. If the noise persists, consult the manual or a technician.
Check the drain hole inside the refrigerator for blockages and clear it if necessary. Ensure the refrigerator is level to prevent water from accumulating.
To replace the bulb, first unplug the refrigerator. Locate the light cover inside the fridge, remove it, and replace the old bulb with a new one of the same type and wattage.
Store raw meat and fish in the coldest part, usually the bottom shelf. Keep dairy and eggs in the main compartment, not the door. Organize items to allow air circulation.
To reset the alarm, press the alarm button on the control panel. Check the manual for specific instructions if the alarm persists.
Ensure the door seals are airtight, avoid placing hot food inside, and maintain the recommended temperature settings. Regularly clean the condenser coils to enhance efficiency.