Brandt SA1562E User Guide
![Brandt SA1562E Refrigerator manual cover](/images/InQBtYnWNSukqfINFgsXwyEV/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the digital control panel inside the refrigerator. Use the '+' and '-' buttons to set your desired temperature for both the fridge and freezer compartments.
First, check if the refrigerator is plugged in and the power is on. Ensure that the door seals are clean and intact. If the problem persists, try adjusting the temperature settings or contact a professional technician for further diagnosis.
The Brandt SA1562E refrigerator is equipped with an automatic defrost system for the fridge compartment. However, you should manually defrost the freezer compartment if ice build-up exceeds 5mm.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of warm water and mild detergent to wipe down all surfaces. Rinse with a clean damp cloth and allow to dry before replacing the food.
To replace the light bulb, first unplug the refrigerator for safety. Remove the light cover by unscrewing it, then replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Unusual noises can be caused by the refrigerator not being level, items inside vibrating, or a malfunctioning fan. Ensure the refrigerator is on a flat surface and check for loose items. If the noise persists, consult a technician.
To change the door swing, you will need to unscrew the door hinges and reattach them on the opposite side. This process may require additional brackets which are usually provided with the refrigerator. Refer to the user manual for detailed instructions.
Check if the door seals are clean and free from obstructions. Make sure the refrigerator is level. If the door still doesn’t close properly, the door seal may need to be replaced.
It's recommended to allow hot food to cool to room temperature before placing it in the refrigerator. Storing hot food directly can raise the internal temperature and affect cooling efficiency.
After a power outage, the Brandt SA1562E refrigerator should reset automatically. If it does not, unplug the unit for a few minutes and then plug it back in. Check the temperature settings and adjust if necessary.