Brandt FSB-5710C User Manual
![Brandt FSB-5710C Dryer manual cover](/images/qhBTXYlYrPIDEbvBLzVyHbEk/thumbs/thumb175x175.webp)
To clean the lint filter, first ensure the dryer is off and cool. Open the door and locate the filter at the bottom of the door opening. Pull it upwards to remove. Use your fingers or a soft brush to remove lint. Rinse under warm water if necessary and dry completely before reinserting.
If the dryer isn't heating, check if the power supply is consistent. Ensure the cycle settings are correct and not on an air-dry function. Inspect the lint filter and vent for blockages. If issues persist, it may require a technician to check the thermostat or heating element.
Unusual noises can be caused by loose objects in the drum or worn-out drum rollers. Check for any foreign objects in the drum and remove them. If the noise continues, inspect the rollers and replace them if they are worn.
To prevent wrinkles, do not overload the dryer and promptly remove clothes once the cycle is complete. Use a lower heat setting and consider using the wrinkle-free cycle if available. Shaking clothes out before placing them in the dryer can also help.
To clean the exterior, unplug the dryer and use a soft, damp cloth with mild detergent to wipe the surfaces. Avoid using abrasive cleaners or solvents. Ensure the control panel is not excessively wet. Dry thoroughly with a soft cloth.
The dryer vent should be cleaned every 6-12 months to ensure efficient operation and prevent fire hazards. This includes checking the external vent cap and cleaning the ductwork with a vacuum or professional service.
If the dryer stops mid-cycle, check for a blown fuse or tripped circuit breaker. Ensure the door latch is secure. Overheating can also cause shutdowns, so check for blocked vents or lint buildup. If problems persist, a faulty thermostat or timer may be the issue.
While not recommended, drying sneakers in the dryer can be done on a low heat setting. Use a drying rack or tie the laces together and hang them inside the door to prevent them from tumbling. Always check the manufacturer's care label first.
Ensure the dryer is installed correctly with proper ventilation. Regularly clean the lint filter and vent ducts. Do not leave the dryer running unattended. Avoid drying items with flammable stains, and keep the surrounding area free of clutter.
To improve efficiency, clean the lint filter after each use and ensure the vent system is clear. Avoid overloading the dryer and separate heavier and lighter items. Use the appropriate drying cycle for different fabrics and consider using dryer balls to enhance air circulation.