Brandt FC350MW User Manual

To preheat the Brandt FC350MW Oven, set the desired temperature using the temperature dial and select the appropriate cooking mode. Wait until the oven reaches the set temperature, as indicated by the preheat light turning off.
If the oven does not heat up, ensure that it is properly plugged in and that the circuit breaker is not tripped. Check the settings to ensure the correct mode and temperature are selected. If the issue persists, contact a qualified technician.
To clean the interior, first ensure the oven is completely cool. Remove any loose debris with a soft brush. Use a damp cloth with mild detergent to wipe the surfaces. Avoid using abrasive cleaners or sharp tools.
Regularly clean the oven and check seals for damage. Ensure vents are not blocked and inspect heating elements for wear. Schedule annual maintenance with a professional if necessary.
To use the grill function, select the grill mode on the control panel and set the desired temperature. Place the food on the grill rack and position it appropriately in the oven. Monitor the cooking to avoid burning.
A burning smell can be due to food residue or grease inside the oven. Ensure the oven is clean and free of debris. If the smell persists, inspect the oven for any signs of electrical issues and consult a technician if needed.
To replace the light bulb, ensure the oven is unplugged and completely cool. Remove the protective cover inside the oven, unscrew the old bulb, and replace it with a new bulb of the same type. Reattach the cover securely.
Yes, you can use aluminum foil in the oven, but do not cover the entire rack or oven base as it can block air circulation and affect cooking performance. Use it to cover food or line baking trays.
For even cooking, preheat the oven, use the fan-forced mode if available, and avoid overcrowding the oven. Rotate dishes halfway through the cooking time to ensure even heat distribution.
Check for obstructions around the door seal. Inspect the hinges and seals for damage or wear. If the door still doesn't close properly, contact a professional technician for repair.