Brandt EFE110K User Manual

To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Pull it out, remove any lint by hand or with a soft brush, and then reinsert it securely before using the dryer again.
If your dryer is not heating, check if the power supply is connected and if the circuit breaker is on. Also, ensure that the selected program includes a drying phase. If the issue persists, it may require professional servicing.
Unusual noises can be caused by items caught in the drum or loose objects inside the dryer. Check for any foreign objects and remove them. If the noise continues, inspect the drum support rollers and belts, and consider consulting a technician.
To prevent wrinkles, remove clothes promptly after the drying cycle ends. Use the "anti-crease" feature if available, and avoid overloading the dryer for better tumbling action.
Regularly clean the lint filter and check the vent system for blockages. Wipe the drum with a damp cloth to remove residue, and inspect the power cord and plug for any damage.
To reset the dryer, turn the control dial to the "Off" position, unplug the appliance for a few minutes, then plug it back in and select a drying cycle to restart the machine.
Mid-cycle stops can occur due to overheating or a tripped thermostat. Ensure the vent is not blocked and the room is well-ventilated. If the problem continues, professional inspection may be needed.
It is not recommended to dry shoes in the dryer as it can damage the drum and make noise. Instead, use a shoe drying rack or air dry them to prevent damage.
For delicate fabrics, use a low heat setting or a special "Delicate" cycle if available. Place the items in a mesh laundry bag to reduce friction and prevent damage.
To clean the exterior, use a soft cloth dampened with mild detergent and water. Avoid using abrasive cleaners or solvents that may damage the finish.