Brandt DYB500JE1 User Manual
![Brandt DYB500JE1 Dishwasher manual cover](/images/wxAdFVKveXSupbiGimFdjwrO/thumbs/thumb175x175.webp)
To reset the Brandt DYB500JE1 dishwasher, press and hold the 'Start/Pause' button for about 3 seconds until the indicator light blinks. Then, release the button and select the desired program.
Ensure the dishwasher is plugged in and the door is properly closed. Check the circuit breaker and reset if necessary. Make sure the water supply is turned on.
To clean the filter, remove the lower rack, locate the filter at the bottom of the dishwasher, twist it counterclockwise and lift it out. Rinse under warm water and replace it by twisting clockwise.
Check for clogs in the drain hose and ensure the sink drain is clear. Inspect the filter for debris and clean it if necessary. Make sure the drain pump is functioning.
Use a high-quality, phosphate-free dishwasher detergent. You can choose between powder, gel, or tablet forms, but ensure they are suitable for automatic dishwashers.
Open the rinse aid dispenser located on the inside of the door, adjust the dial to the desired setting (usually from 1 to 6), and close the dispenser.
Error code 'E4' indicates a water overflow issue. Check for leaks, ensure the drain hose is positioned correctly, and make sure the water inlet valve is shut off when the machine is off.
It's recommended to clean the dishwasher's filter, spray arms, and interior surfaces monthly to maintain optimal performance and hygiene.
Yes, you can use vinegar to clean the dishwasher. Place a cup of white vinegar in a dishwasher-safe container on the top rack and run a hot water cycle without any detergent.
Ensure the rinse aid dispenser is filled, select a drying option if available, and avoid overloading the dishwasher to allow proper air circulation.