Brandt DFS710WE1 User Manual

To reset the Brandt DFS710WE1 dishwasher, press and hold the Start/Pause button for about 3 seconds until the display shows a reset indication. This will cancel the current cycle and reset the dishwasher.
Ensure that the drain hose is not kinked or clogged. Check the filter and sump area for debris. Clean them if necessary. Also, verify that the kitchen sink drain isn't blocked.
It is recommended to clean the filter every month to maintain optimal performance. Remove the filter assembly and rinse it under running water. Use a soft brush to remove any stubborn debris.
Use a high-quality dishwasher detergent in powder, liquid, or tablet form. Avoid using regular dish soap as it can cause excessive sudsing and damage the dishwasher.
Spots on glassware can be caused by hard water. Ensure that the rinse aid dispenser is filled, and adjust the rinse aid setting if necessary. Also, make sure you are using the correct amount of detergent.
To improve drying performance, use a rinse aid, select a program with a higher temperature, and ensure that the dishwasher is not overloaded, allowing proper air circulation.
Unusual noises can be caused by items in the dishwasher rattling against each other or the spray arms. Ensure that all items are securely placed and that the spray arms can rotate freely.
Clean the filter and check for food debris in the bottom of the dishwasher. Run a cleaning cycle with a dishwasher cleaner or a mixture of vinegar and baking soda to eliminate odors.
Ensure that the dishwasher door is fully closed and latched. Check the power supply and circuit breaker. Also, verify that the Start/Pause button has been pressed.
Yes, you can wash plastic items, but ensure they are labeled as dishwasher-safe. Place them on the top rack to avoid exposure to the heating element.