Brandt DFH825WE1 User Manual

To properly load dishes, ensure large items do not block the spray arms, place pots and pans upside down, and do not overcrowd the racks. Use the designated spots for silverware and keep similar items together.
Check if the door is securely closed and latched. Ensure the dishwasher is properly plugged in and the circuit breaker is not tripped. Also, verify that the water supply is turned on.
To clean the filter, remove the lower dish rack, twist the filter counterclockwise to remove it, rinse under running water, and scrub gently with a soft brush if necessary. Reinsert the filter by twisting clockwise.
Use a high-quality, phosphate-free detergent specifically designed for automatic dishwashers. Refer to the dishwasher manual for specific recommendations.
Check the drain hose for kinks or blockages. Clean the filter and ensure the drain pump is not obstructed. If the problem persists, consult a technician.
Regularly clean the filter, wipe down the door seals, check the spray arms for blockages, and run an empty cycle with a dishwasher cleaner once a month.
Ensure the rinse aid dispenser is filled, use the heated dry option, and open the dishwasher door slightly after the cycle to release steam. Arrange dishes to allow maximum airflow.
The dishwasher includes features such as an eco-wash cycle, delay start to run during off-peak hours, and an efficient drying system. These help reduce energy consumption.
Unusual noises may result from items touching the spray arms or loose parts in the dishwasher. Ensure dishes are properly loaded, and check for any loose screws or fittings.
To reset the dishwasher, turn off the power for a few minutes by unplugging it or switching off the circuit breaker. Restore power and try starting the dishwasher again.