Brandt DFH144LX User Manual
![Brandt DFH144LX Dishwasher manual cover](/images/saVpcuEOydqQKpkefQqePMOC/thumbs/thumb175x175.webp)
To start a cleaning cycle, load your dishes, add detergent, select the desired wash program using the program selector button, and press the start button. Make sure the door is securely closed.
Check for clogs in the drain hose, filter, or garbage disposal connection. Ensure the drain hose is not kinked or clogged. Clean the dishwasher filter and ensure the sink drain isn't blocked.
To clean the filter, locate it at the bottom of the dishwasher, twist and pull it out, then rinse it under running water to remove debris. Reinstall the filter by aligning and twisting it back into place.
Ensure that you are using a rinse aid, as it aids in the drying process. Also, make sure the selected program includes a drying cycle and check that the dishwasher's heating element is functioning properly.
Error code E4 indicates a water overflow. Check if the dishwasher is overfilled with water, inspect the water inlet valve, and ensure the float switch is not stuck.
It's recommended to descale your dishwasher every 3 to 6 months, depending on the hardness of your water and frequency of use, to maintain optimal performance and prevent mineral buildup.
No, you should not use regular dish soap as it can create excessive suds and cause leaks. Always use dishwasher-specific detergent.
Regularly clean the filter, check and clean spray arms, inspect and clean the door seal, and run an empty cycle with a dishwasher cleaner every month.
To reset the dishwasher, press and hold the start button for a few seconds until the indicators reset. Alternatively, unplug the dishwasher for a minute and then plug it back in.
Check for items obstructing the spray arms, ensure dishes are properly loaded, and inspect for loose or worn components. Make sure the dishwasher is level to prevent vibrations.