Brandt DFH13534W User Manual

To start a wash cycle, load your dishes, add detergent, close the door, select your desired cycle using the control panel, and press the start button. The dishwasher will begin the wash cycle.
If your dishwasher is not draining, check for clogs in the filter, drain hose, or garbage disposal. Ensure that the drain hose is not kinked and that the sink's drain is not blocked.
To clean the filter, remove the bottom rack and unscrew the filter cover located at the bottom of the dishwasher. Rinse the filter under running water and remove any debris. Reinstall the filter and secure the cover.
It is recommended to clean the filter monthly, check and clean the spray arms every three months, and inspect the door seals regularly for optimal performance.
Ensure that the spray arms are not clogged, the detergent is fresh, and the water temperature is at least 120°F (49°C). Also, avoid overloading the dishwasher and make sure dishes are not blocking the spray arms.
It is recommended to use high-quality, dishwasher-specific detergent in either powder, gel, or tablet form for best results. Avoid using regular dish soap as it can cause excessive suds and damage the appliance.
To reset the dishwasher, turn off the device by pressing the power button, wait a few minutes, and then turn it back on. If the problem persists, consult the user manual for further instructions.
Unusual noises can be caused by items in the dishwasher blocking the spray arms, loose items in the tub, or an unbalanced load. Ensure that all items are securely placed and that the spray arms can spin freely.
Yes, using rinse aid can help improve drying performance and reduce water spots. Fill the rinse aid dispenser located on the inside of the door and adjust the dosage setting as needed.
Always ensure the dishwasher is properly grounded, do not operate with damaged cords or plugs, and keep children away from the machine when in use. Avoid using the dishwasher for non-dishwashing purposes.