Brandt COA340WU User Manual

To change the water filter, locate the filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it, then insert the new filter and turn it clockwise until secure. Make sure to flush the filter by running water through it for a few minutes.
Check if the temperature setting is correct. Ensure the vents inside the refrigerator are not blocked. Clean the condenser coils located at the back or bottom of the unit. If the issue persists, it may require professional servicing.
To defrost the freezer, turn off the refrigerator and remove all items from the freezer. Leave the freezer door open to allow the ice to melt. You can place towels to absorb water and speed up the process using a fan.
This could be due to a clogged defrost drain. Clean the drain hole at the back of the refrigerator with warm water and a small brush or pipe cleaner to ensure proper drainage.
It is recommended to clean the condenser coils every six months to maintain optimal performance and efficiency.
The temperature settings allow you to control the refrigerator and freezer temperatures. Typically, a setting of 3-5 degrees Celsius for the refrigerator and -18 degrees Celsius for the freezer is ideal.
Ensure the refrigerator is level and not touching the wall or cabinets. Check for loose parts and tighten them if necessary. It's also important to not overload the refrigerator, which can cause vibrations and noise.
Check if the ice maker is turned on and connected to the water supply. Ensure there are no blockages in the water line and that the freezer temperature is set correctly.
Keep the refrigerator and freezer full but not overcrowded. Ensure the door seals are intact and close properly. Place the refrigerator away from heat sources and clean the coils regularly.
Turn off the refrigerator and remove all food items. Use a mixture of baking soda and water or a mild detergent to wipe down the interior surfaces. Rinse with clean water and dry thoroughly before replacing the food.