Brandt CFB200WU User Manual
![Brandt CFB200WU Refrigerator manual cover](/images/gjoIipnhSXojywSSEDiibBMT/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counterclockwise to increase it.
Ensure the refrigerator is plugged in and the power is on. Check the temperature settings and make sure the door seals are clean and intact. If issues persist, contact Brandt customer support.
It is advisable to defrost the freezer compartment when the frost build-up reaches about 1/4 inch thick. This helps maintain efficient cooling performance.
Use a soft cloth or sponge with a mild detergent mixed with warm water. Avoid using abrasive cleaners or sharp objects that could damage the interior surfaces.
First, unplug the refrigerator. Locate the light bulb cover inside the refrigerator and remove it. Unscrew the old bulb and replace it with a new one of the same wattage. Reattach the cover and plug the refrigerator back in.
Unusual noises may result from the refrigerator not being level, items vibrating inside, or the compressor cycling. Ensure the refrigerator is positioned on a level surface and rearrange items if necessary.
Keep the refrigerator away from heat sources, ensure door seals are tight, and avoid frequent door openings. Maintaining proper air circulation inside also helps improve efficiency.
Check for obstructions along the door seal, ensure the refrigerator is level, and inspect the door gasket for damage. Adjust the door hinges if necessary for proper alignment.
Yes, the door swing direction can be changed. Refer to the user manual for detailed instructions and ensure you have the necessary tools before attempting the modification.
Store raw meat on the lowest shelf to prevent drips, use airtight containers for leftovers, and avoid overpacking shelves to allow for proper air circulation.