Brandt CAF-DECO User Manual

To descale the Brandt CAF-DECO, fill the water reservoir with a mixture of equal parts water and white vinegar. Run a brew cycle without coffee grounds, then repeat the cycle with clean water to rinse.
Check if the coffee maker is plugged in and that the outlet is working. Ensure the water reservoir is filled to the minimum level and the carafe is properly positioned. Reset the machine if necessary.
Remove the filter basket and rinse it under warm water. For a deeper clean, wash it with mild detergent and a soft brush, then rinse thoroughly and let it dry completely.
Ensure the water reservoir is seated correctly and not overfilled. Check for cracks in the reservoir or seals, and inspect the drip tray for overflow.
A medium grind is recommended for optimal brewing with the Brandt CAF-DECO, balancing extraction and flow rate.
Yes, you can use standard paper filters in the filter basket as an alternative to the permanent filter. Ensure the paper filter fits snugly to avoid overflow.
To adjust coffee strength, vary the amount of coffee grounds used or select different brewing modes if available on the Brandt CAF-DECO.
Regular maintenance includes descaling every 1-2 months, cleaning the carafe and filter basket weekly, and wiping the exterior with a damp cloth.
Bitter coffee can result from over-extraction or using too fine a grind. Try using a coarser grind or reducing the brew time.
Press the 'Program' button and use the hour and minute buttons to set the desired start time. Ensure the clock is set correctly for accurate operation.