Brandt BWW574I User Manual
![Brandt BWW574I Washing Machine manual cover](/images/zfBsyhRCYVfzKbKwIMKzqIIB/thumbs/thumb175x175.webp)
To load clothes properly, ensure that you do not overload the drum. Distribute clothes evenly around the drum to maintain balance during the spin cycle. Avoid packing clothes too tightly to ensure effective washing and rinsing.
First, check if the washing machine is properly plugged in and the power supply is functional. Ensure the door is closed securely and the start button is pressed. If the problem persists, check the circuit breaker or contact customer support.
Remove the detergent drawer by pulling it out gently. Rinse it under warm water to remove any detergent residue. Use a soft brush to clean any stubborn deposits and ensure all compartments are free from blockages before reinserting it.
Regularly clean the drum, detergent drawer, and door seal. Check and clean the filter every few months. Run a hot wash cycle with a washing machine cleaner to remove build-up. Ensure the machine is level to avoid excessive vibration.
Ensure the washing machine is on a stable, level surface. Check that all transport bolts have been removed. Avoid overloading the machine and distribute laundry evenly. Consider placing anti-vibration pads under the machine's feet.
Check if the drain hose is kinked or clogged. Inspect and clean the pump filter, which may be blocked by debris. Ensure the drain hose is positioned correctly at the recommended height above the ground.
The Brandt BWW574I offers a 'Delicates' cycle specifically designed for gentle washing, reducing agitation and spin speed to protect delicate fabrics. Always check garment care labels before selecting the cycle.
Leave the door open after each wash to allow the interior to dry. Regularly clean the door seal and detergent drawer. Consider using a machine cleaner monthly to eliminate mold and mildew spores.
Ensure the machine is level and all feet are firmly on the ground. Check that the load is balanced, with items evenly distributed around the drum. Remove any transport bolts if not already done.
To reset the machine, turn it off and unplug it for a few minutes. Plug it back in and turn it on. If the error persists, refer to the user manual for specific error codes and troubleshooting steps.