Brandt BWT6010E User Manual

To start a wash cycle, load your laundry, add detergent to the appropriate compartment, close the door, select the desired program using the program selector, and press the start button.
Ensure the machine is plugged in and the power switch is turned on. Check if the door is properly closed and that the water supply is connected. If the problem persists, refer to the user manual or contact customer support.
Remove the detergent drawer by pulling it out gently. Rinse it under warm water to remove any residue. Use a soft brush to clean hard-to-reach areas, then dry thoroughly before reinserting.
Regularly clean the detergent drawer, check and clean the filter, wipe the door seal to prevent mold buildup, and run an empty hot water cycle with vinegar or a washing machine cleaner monthly.
Check if the door seal is clean and intact. Ensure hoses are properly connected and not damaged. Inspect the detergent drawer for blockages. If the issue continues, consult the manual or a technician.
Pause the machine, redistribute the laundry evenly in the drum, and restart the cycle. Avoid mixing heavy and light items in the same load for better balance.
Use a high-efficiency (HE) detergent to ensure optimal washing performance and to prevent excess suds, which can damage the machine.
Do not overload the drum, mix different types of fabrics, and use mesh laundry bags for delicate items. Select a gentle cycle to reduce tangling.
Run a hot water cycle with a washing machine cleaner or a cup of baking soda and a cup of white vinegar. Clean the door seal and leave the door open after use to allow air circulation.
Wash full loads whenever possible, use cold water settings, and select shorter wash cycles when suitable. Regular maintenance also helps maintain efficiency.