Brandt BWF7214E User Manual

To start a wash cycle, first load your laundry into the drum. Add detergent to the dispenser. Select your desired wash program using the control panel. Finally, press the start button to initiate the cycle.
Check if the machine is properly plugged in and switched on. Ensure the door is closed securely. Verify if the start button has been pressed. If the issue persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out gently. Wash it under warm water to remove any residue. Dry it thoroughly before placing it back into the washing machine.
Ensure the washing machine is level on the floor. Check if the transit bolts have been removed. Avoid overloading the machine and distribute laundry evenly in the drum.
Run an empty cycle with hot water, adding a suitable washing machine cleaner to the drum. This helps remove detergent residue and maintain machine hygiene.
Check for blockages in the drain hose or filter. Ensure the drain hose is not kinked. Clean the pump filter located at the bottom of the machine.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the door seal and drum to prevent mold buildup.
Use cold water wash programs when possible, as heating water consumes more energy. Ensure the machine is fully loaded but not overloaded for optimal efficiency.
Use high-efficiency (HE) detergents for best results, as they are formulated to work with modern washing machines like the BWF7214E.
The lint filter should be checked and cleaned every month to ensure the machine operates efficiently and to prevent blockages.