Brandt BFK715MSS User Manual
![Brandt BFK715MSS Refrigerator manual cover](/images/BidDLbdAywtGQflvWUudFhzP/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control panel inside your refrigerator. Use the digital display to select the desired temperature for both the refrigerator and freezer compartments.
Unusual noises may be due to the refrigerator being improperly leveled. Check the leveling legs and adjust them to ensure the refrigerator is stable. Also, ensure that items inside are not vibrating against the walls.
To clean the condenser coils, unplug the refrigerator and locate the coils either at the back or bottom. Use a vacuum cleaner with a brush attachment to remove dust and debris.
The 'Eco Mode' optimizes energy consumption by adjusting the cooling cycle. It is ideal for use when the refrigerator is not frequently opened.
Locate the water filter compartment, usually at the top or bottom of the refrigerator section. Twist the old filter counterclockwise to remove it, and install the new one by twisting it clockwise until secure.
Ensure the vents inside the refrigerator are not blocked by food items. Check the door seals for any gaps or damage, and verify that the temperature settings are correct.
To defrost the freezer, remove all items and unplug the refrigerator. Leave the freezer door open to allow the ice to melt naturally. Use towels to absorb water as needed.
Regularly clean the interior and exterior surfaces, check and clean the door seals, and vacuum the condenser coils every six months. Replace the water filter as recommended.
To reset the control panel, unplug the refrigerator from the power source for a few minutes, then plug it back in. This will reset the electronic controls.
First, check if the bulb is burnt out and replace it if necessary. If the bulb is functional, check the light switch for any obstructions or damage.