Brandt BFD811CE User Manual

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control panel, and press the start button.
Check if the washing machine is properly plugged in and if the door is securely closed. Also, verify that the water supply is turned on and there are no error codes displayed on the control panel.
Remove the detergent dispenser by pulling it out gently. Wash it under warm water to remove any residues and reinsert it after drying.
Ensure the load is balanced and not too heavy. Check for any blockages in the drain pump filter and examine if the spin speed is correctly set.
Run an empty wash cycle at the hottest temperature setting with a drum cleaning detergent or a cup of vinegar to remove residues and odors.
Regularly clean the detergent drawer, door seals, and drum. Also, check and clean the drain pump filter and ensure there are no leaks.
To reset the machine, unplug it from the power source, wait for a minute, and then plug it back in. This can help reset the electronic controls.
Error codes indicate specific issues. Refer to the user manual for the meaning of each code and follow the recommended troubleshooting steps.
Ensure the machine is level and stable. Check the floor for sturdiness and adjust the feet to prevent vibrations. Avoid overloading the drum.
Use high-efficiency (HE) detergents for optimal performance and to prevent excess suds that can lead to malfunctions.