Brandt BFD637SEG User Manual
![Brandt BFD637SEG Refrigerator manual cover](/images/ieLLzJPVJWhOlPKsVycDRBIK/thumbs/thumb175x175.webp)
To set the temperature, locate the temperature control panel on the inside of the refrigerator. Use the '+' and '-' buttons to adjust the desired temperature. The ideal setting for the refrigerator is around 3°C to 4°C.
Unusual noises can be due to the positioning of the refrigerator or items inside. Ensure that the refrigerator is level and that items inside are not vibrating against each other. If noise persists, check the condenser fan and motor for debris or wear.
The Brandt BFD637SEG is typically a no-frost model, but if you notice ice buildup, defrost every 6 months. Remove all items, unplug the refrigerator, and leave the door open to allow ice to melt naturally.
Clean the interior with a mixture of mild detergent and water. Use a soft cloth or sponge to wipe surfaces. Avoid abrasive cleaners which can damage the lining. Rinse with clean water and dry with a towel.
Water pooling can be caused by a blocked defrost drain. Locate the drain at the back of the refrigerator and clear any obstructions with a pipe cleaner or warm water.
Ensure the refrigerator is placed away from heat sources and has adequate ventilation. Regularly clean the condenser coils and check door seals for any gaps. Keep the temperature settings at optimal levels.
Check the thermostat settings first. Ensure the vents inside the refrigerator are not blocked. Clean the condenser coils, and if the problem persists, it may require a technician to inspect the compressor or refrigerant levels.
Unplug the refrigerator. Locate the light cover inside the unit and remove it by unscrewing or unclipping it. Replace the bulb with a new one of the same type and wattage, then reattach the cover.
Yes, the door swing direction can be changed. Refer to the user manual for instructions on how to unscrew and reattach the door hinges on the opposite side. This task may require two people.
Inspect the door gasket for cracks or deformities. Clean the gasket with warm soapy water to remove dirt or debris. If the gasket is damaged, it may need to be replaced to ensure a proper seal.