Brandt BFC8610NW User Manual
![Brandt BFC8610NW Refrigerator manual cover](/images/mgEEAiQxbjWodlSqYRWVmbvQ/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator compartment. Use the up and down buttons to set your desired temperature for both the fridge and freezer sections.
First, check if the refrigerator is plugged in and the power is on. Ensure the temperature settings are correctly set. Clean the condenser coils and check the door seals for any gaps. If the issue persists, consult a professional technician.
Unplug the refrigerator, locate the light cover inside the fridge, and remove it by unscrewing or unclipping it. Replace the bulb with a new one of the same type and wattage, then reattach the cover.
Use a mixture of mild detergent and warm water with a soft cloth or sponge. Avoid using abrasive cleaners or scouring pads that can damage the surfaces. Rinse with clean water and dry thoroughly.
The Brandt BFC8610NW is equipped with a no-frost system, so it doesn't require manual defrosting. However, if you notice ice build-up, ensure the door seals are intact and not left open frequently.
Some noises are normal, such as the compressor running or the defrost cycle. However, if you hear loud or unusual noises, check if the fridge is level and not touching the wall or surrounding objects.
Regularly clean the interior and remove expired food. Use baking soda in an open container as an odor absorber. Ensure the fridge is well-ventilated and not over-packed for good air circulation.
Inspect the seal for any visible damage or debris. Clean it with warm soapy water. If the seal is cracked or broken, it should be replaced. Contact Brandt customer service for replacement parts.
To activate holiday mode, press the holiday mode button on the control panel. This feature reduces energy consumption while maintaining a stable temperature when you're away for an extended period.
Clean the condenser coils every six months, check and clean the door seals regularly, and replace the water filter (if applicable) as recommended by the manufacturer.