Brandt BFC7527WD User Manual

To adjust the temperature settings, locate the temperature control panel inside the refrigerator. Use the up and down arrows to set your desired temperature for both the fridge and freezer compartments.
First, ensure that the refrigerator is plugged in and the power is on. Check if the temperature settings are correctly set. Make sure the door seals are clean and not damaged to prevent cold air leakage. If the problem persists, contact a qualified technician.
It is recommended to clean the condenser coils every 6 months to maintain efficient cooling and prolong the lifespan of the refrigerator.
The ideal temperature setting for the refrigerator compartment is between 3°C and 5°C (37°F to 41°F), and for the freezer, it should be set to -18°C (0°F).
Ensure that the freezer door is closed tightly and not left open for extended periods. Avoid overloading the freezer, which can obstruct airflow. Regularly defrost the freezer if ice accumulation is noticeable.
Unusual noises can be due to the compressor, fans, or the defrost timer. Check to ensure that the refrigerator is level and that nothing is vibrating against the back wall. If the noises continue, consult with a service technician.
To change the light bulb, unplug the refrigerator. Locate the light cover inside the fridge, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Water pooling can be due to a blocked defrost drain. Clear any blockages from the drain by flushing it with warm water. Ensure that the refrigerator is properly leveled to allow proper drainage.
To ensure energy efficiency, keep the refrigerator and freezer doors closed as much as possible. Maintain proper temperature settings, clean the condenser coils regularly, and ensure the door seals are intact.
Empty and clean the refrigerator thoroughly. Unplug it and leave the doors slightly open to prevent odors. You may also clean and dry the interior to prevent mold growth.