Brandt BCG6501S User Manual
![Brandt BCG6501S Cooker manual cover](/images/KkcomMMlImUnPNEjljbvbqBE/thumbs/thumb175x175.webp)
To set the timer, press the "Timer" button until the display begins to flash. Use the "+" and "-" buttons to adjust the time, and press "Start" to confirm.
Ensure that the cooker is connected to a power source and the circuit breaker is not tripped. If the problem persists, check the user manual for additional troubleshooting steps or contact customer support.
To clean the glass door, use a non-abrasive glass cleaner and a soft cloth. Avoid using harsh chemicals or scrubbing pads that might scratch the surface.
Regularly clean the exterior and interior surfaces after each use. Schedule professional maintenance annually to ensure all components are functioning properly.
First, ensure the cooker is turned off and cooled down. Remove the protective glass cover inside the oven, unscrew the old bulb, and replace it with a new one of the same type and wattage.
Check if the cooker is properly plugged in and the circuit breaker is not tripped. If the display panel is still unresponsive, a reset might be required. Consult the user manual for reset instructions.
It is recommended to use wooden or silicone utensils to avoid scratching the cookware surface, which may reduce its lifespan and effectiveness.
To calibrate the oven temperature, access the settings menu, select "Temperature Calibration," and follow the prompts to adjust the temperature settings as needed.
Check for any obstructions or debris around the door seal. If the problem persists, the door hinges may need adjustment or replacement. Refer to the user manual for further guidance.
Use the oven's convection setting for faster cooking and lower energy use. Ensure to preheat only when necessary and keep the oven door closed as much as possible during cooking.