Brandt BAM84WSUA User Manual
![Brandt BAM84WSUA Washing Machine manual cover](/images/IlXiVqEInYgBCAcFwvLAeYWb/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the designated compartment, close the door, select the desired program using the program dial, and press the start button.
Check if the drain hose is kinked or clogged. Ensure the filter is clean and inspect the pump for any blockages. If the issue persists, consult a professional technician.
Remove the detergent drawer by pulling it out gently and pressing the release lever. Rinse it under warm water to remove any detergent buildup, and then dry it before reinserting it.
Leave the door open after each wash to allow the interior to dry. Regularly clean the gasket with a mild detergent and ensure the detergent drawer is free of residue.
Ensure the washing machine is level and on a stable surface. Check if the load is balanced and not too heavy. Adjust the feet if necessary to stabilize the machine.
It's recommended to run a maintenance wash once a month using a washing machine cleaner or a cup of white vinegar at the hottest setting to keep the machine clean and odor-free.
Check if the machine is properly plugged in and the power is on. Try resetting the machine by turning off the power for a few minutes before turning it back on. If the problem continues, contact customer support.
Yes, the washing machine has a dedicated delicate wash cycle designed for gentle fabrics. Ensure to use the appropriate detergent and avoid overloading the drum.
To reset the machine, turn it off and unplug it for about 5 minutes. Plug it back in and turn it on. Refer to the user manual for specific reset instructions if needed.
Check if the machine is in the middle of a cycle or if there is water still in the drum. Wait for a few minutes after the cycle ends. If it remains stuck, manually activate the emergency release or consult a technician.