Bosch Series 6 SMS6TCI00E Quick Instruction Guide

To start a cleaning cycle, load your dishes, add detergent, close the door, select the desired program using the control panel, and press the start button.
First, check if the sink drain is clear. Then, inspect the dishwasher's filter and drain hose for blockages. Ensure the drain pump is working. If problems persist, consider contacting Bosch support.
Remove the lower dish rack, twist the cylindrical filter counterclockwise, lift it out, and rinse under running water. Clean the mesh filter with a brush and then reinstall them in the reverse order.
Check if the door is properly closed and latched. Ensure the dishwasher is plugged in and the circuit breaker has not tripped. Verify if the delay start function is activated.
Regularly clean the filter, check and clean the spray arms, wipe the door seals, and run an empty cycle with a dishwasher cleaner monthly to prevent build-up.
To reset the dishwasher, press and hold the start button for about 3 seconds until the display indicates a reset. This will cancel the current cycle and drain the water.
No, do not use regular dish soap as it can create excessive suds leading to overflow and potential damage. Always use dishwasher-specific detergents.
The E15 error code indicates that the anti-flood device has been activated, often due to water leakage. Check for leaks and ensure the dishwasher is level.
Use a rinse aid to enhance drying performance. Ensure the "Extra Dry" option is selected if available. Also, open the door slightly after the cycle to allow air circulation.
Place large items like pots and pans on the bottom rack, ensuring they do not block the spray arms. Angle items for optimal water flow and cleaning.