Bosch Series 2 SMS2ITW41G Quick Instruction Guide

To reset the dishwasher, press and hold the Start button for about 3 seconds until the display shows "0:00" indicating that the reset is complete.
Check for any blockages in the drain hose or filter. Ensure that the sink drain is not clogged and the drain pump impeller is not obstructed.
Remove the bottom rack to access the filter at the bottom of the dishwasher. Twist the filter counterclockwise to remove it, then rinse it under running water to remove debris.
Ensure you are using the appropriate amount of rinse aid. Hard water can also cause spots, so consider using a water softener if necessary.
No, you should only use detergent specifically designed for dishwashers to prevent excessive suds and potential damage.
The "Check Water" indicator usually means there is a problem with the water supply. Check the water inlet hose, ensure the tap is turned on, and that the filter in the hose is clean.
It is recommended to clean the spray arms once a month to ensure optimal performance. Remove them and rinse under running water to clear any blockages.
Yes, but ensure that plastic items are dishwasher-safe and place them on the top rack to prevent warping.
To improve drying performance, use a rinse aid and select a longer drying cycle if available. Ensure that the dishwasher is not overfilled, which can block airflow.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, wiping down the door seal, and ensuring that the drain and inlet hoses are free of obstructions.