Bosch Series 2 SMS2ITI41G Quick Instruction Guide
![Bosch Series 2 SMS2ITI41G Dishwasher manual cover](/images/kFhFqSlUJRNrDufLmvjsPdXN/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishwasher, add detergent, close the door, select the desired program using the control panel, and press the start button.
If your dishwasher is not draining, check for blockages in the drain hose, filter, or pump. Ensure the drain hose is correctly installed and not kinked.
Ensure that dishes are loaded correctly, not blocking the spray arms. Check that the spray arms can rotate freely and are not clogged. Use the correct amount of detergent and the appropriate program for the soiling level.
To clean the filter, remove the bottom rack, twist and lift the filter out, rinse it under running water, and scrub gently with a soft brush. Reinstall it by aligning and twisting back into place.
The E15 error code indicates a water leak or overflow. Turn off the appliance and check for leaks in the hose or inside the dishwasher. If the problem persists, contact a service technician.
The frequency of adding dishwasher salt depends on your local water hardness. Check the salt indicator on the control panel; if it's lit, refill the salt compartment.
No, regular dish soap can cause excessive suds and potentially damage the dishwasher. Always use dishwasher-specific detergents.
Regularly clean the filter, check and clean the spray arms, wipe the door gasket, and run a cleaning cycle with a dishwasher cleaner once a month to maintain optimal performance.
To adjust the rinse aid setting, open the rinse aid dispenser located on the inside of the door, turn the dial to the desired level, and close the dispenser. A higher setting increases the amount of rinse aid used per cycle.
Unusual noises can be caused by items obstructing the spray arms, loose dishes, or foreign objects in the pump. Check these areas and adjust or remove as necessary.