Bosch Series 4 WAN28209GB User Manual
![Bosch Series 4 WAN28209GB Washing Machine manual cover](/images/dOYuGRYKDljUxQZcqaUQPWtr/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the rotary knob, and press the 'Start' button.
Check if the drain hose is kinked or blocked. Also, ensure the pump filter is clean. If the problem persists, consult the user manual or contact customer service.
To clean the detergent drawer, remove it by pulling it out gently. Rinse it under warm water to remove any detergent residue. Use a soft brush if necessary.
The maximum load capacity for the Bosch Series 4 WAN28209GB is 8 kilograms. Ensure not to exceed this limit to maintain optimal washing performance.
Ensure the washing machine is level and all transit bolts have been removed. Uneven loads can also cause vibration; try redistributing the laundry.
Run an empty wash cycle at 90°C with a drum cleaning detergent or a cup of white vinegar to maintain the drum's cleanliness.
Check if the door is properly closed. Ensure the machine is plugged in and the power outlet is functioning. Also, verify if the 'Start' button has been pressed.
Select the desired wash program, then press the 'Delay' button to set the time delay. Confirm your selection by pressing the 'Start' button.
Regularly clean the detergent drawer, pump filter, and drum. Check the hoses for any leaks or blockages and ensure the machine is level.
Leave the door slightly open after each wash to allow air circulation. Regularly clean the drum and the door seal to prevent mold and mildew buildup.