Bosch Easy 12 User Manual V2

To change the sanding sheet, first ensure the sander is turned off and disconnected from the power source. Then, peel off the old sanding sheet from the sanding plate and attach a new one by aligning it with the plate's edges. Press firmly to ensure it sticks properly.

Check if the battery is charged and properly connected. If the battery is fine, inspect the power switch for any blockages or damage. If the issue persists, contact Bosch customer service for further assistance.

After use, wipe the sander with a dry cloth to remove dust and debris. Avoid using water or solvents. Clean the ventilation slots with a soft brush to prevent clogging.

Decreased performance could be due to a worn-out sanding sheet. Replace the sheet if necessary. Additionally, check for dust build-up in the motor vents, which can affect performance.

Yes, the EasySander 12 can be used on metal surfaces with the appropriate sanding sheet. Ensure that you use the correct grit to avoid damaging the surface.

To maintain the battery, avoid fully depleting it before recharging. Store the battery in a cool, dry place and avoid exposing it to extreme temperatures. Regularly charge it even when not in active use.

Wear protective gear such as goggles and a dust mask. Ensure the workpiece is securely clamped. Avoid operating the sander in damp conditions to prevent electric shock.

Replace the sanding plate if you notice uneven sanding results or if the plate has visible damage like cracks or excessive wear.

Store the sander in a clean, dry place. Keep it in its original case if possible to protect it from dust and moisture. Ensure the battery is removed if storing for extended periods.

Unusual noise can be due to loose parts or a clogged motor. Check for loose screws and tighten them. Clean the motor vents and ensure the sanding sheet is properly attached.