Bosch Series 4 SMV4HTX27G Quick Instruction Guide

Ensure that larger items like pots and pans are placed on the lower rack, and smaller items such as cups and glasses are placed on the upper rack. Avoid blocking the spray arms for optimal cleaning.
Check if the door is properly closed and latched. Ensure that the dishwasher is plugged in and the circuit breaker is not tripped. Also, verify that the water supply is turned on.
Remove the lower rack and unscrew the filter. Rinse it under running water to remove debris, and use a soft brush if needed. Reassemble the filter securely before reuse.
Regularly clean the filters and spray arms. Use dishwasher cleaner monthly to remove limescale and grease buildup. Ensure the door seals are clean and free of debris.
Ensure that the rinse aid dispenser is filled, as this helps with drying. Also, select a higher drying setting if available, and verify that the heat drying option is enabled.
Check for clogs in the filter or the drain hose. Ensure that the drain pump is not blocked. If the problem persists, consider consulting a professional technician.
Ensure the dishwasher is level and properly installed. Check for loose items inside the dishwasher that may rattle. Inspect the spray arms for obstructions.
Press and hold the Start button for approximately 3 seconds until the display shows a reset indication. Release the button and allow the dishwasher to reset.
Use the Intensive or Heavy cycle for heavily soiled pots and pans, as it uses higher temperatures and more water to ensure thorough cleaning.
Open the rinse aid dispenser located on the inside of the dishwasher door. Pour rinse aid into the dispenser until it reaches the maximum fill line, and close the dispenser securely.