Bosch Series 4 SBH4HVX31G Quick Instruction Guide

To reset the Bosch Series 4 SBH4HVX31G dishwasher, press and hold the Start button for about 3-5 seconds until the display shows "0:01" or "Reset." The dishwasher will then begin a short cycle to reset.
Check for clogs in the filter, drain hose, and sink connections. Ensure the filter is clean and the drain hose is not kinked or blocked. Also, verify that the sink's drain is clear.
Ensure that Rinse Aid is filled and adjust the settings to increase the amount used if needed. Selecting the Extra Dry option can also enhance drying performance.
Spots can be caused by hard water. Use a high-quality dishwasher detergent and ensure that Rinse Aid is being used. Adjust the water softener settings if your model has this feature.
Regularly clean the filter, check and clean the spray arms, and wipe down the door seal. Every few months, run an empty cycle with a dishwasher cleaner.
Place larger items like pots and pans on the bottom rack, and smaller items like cups and glasses on the top rack. Ensure items are not blocking the spray arms.
E15 indicates a leak or overflow issue. Check for water at the base of the dishwasher. Ensure the appliance is level and inspect hoses for leaks. If the problem persists, contact a professional.
Unusual noises can be due to items touching the spray arms or the pump being obstructed by debris. Ensure all items are correctly loaded and inspect the filter and pump area for obstructions.
Refer to the user manual to enter the settings menu. Follow the instructions to adjust the water hardness level based on your local water supply.
Check for obstructions around the door seal and ensure the dishwasher is level. Adjust the latch if necessary and ensure the racks are not overfilled.